.jpg)
The COG liquid crystal module is a component that assembles a COG liquid crystal display device, a connecting member, a peripheral circuit for controlling and driving, a PCB circuit board, a backlight, and a structural member.
The technical specifications of the COG liquid crystal module (LCM) currently available from Xin Hongtai are as follows:
The number of dot matrix is: 122*32, 128*64, 160*32, 256*32, 192*64, 240*64, 160*128, 240*128, 256*128, 320*240, 640*200, etc. Product
Working temperature: normal temperature 0 ~ +50 ° C, wide temperature -20 ~ +70 ° C, ultra wide temperature -30 ~ + 80 ° C;
Interface type: 3-wire or 4-wire SPI serial port, 8-bit or 16-bit MCU parallel port, I2C, RS232 or RS485, USB interface;
Display mode: black on white, black on yellow and green, black on blue, white on blue, white on black, custom silk screen, etc.
| Checklist | Model | Product type | Show contents | Product map |
Outline size (mm) |
Horizon (mm) |
Display size mm/inch |
Point spacing mm |
Visual angle | Brightness | Pin | Interface | Instructions | Working temperature | Voltage | Driver chip model |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.2"128X64 monochrome graphic LCD module | with white backlight | FSTN(+) | MCU interface | Arduino HTM12864A-31W-A5P | Graphic LCD Module | 128x64 |
|
113.0x65.0x12.7 | 72.0x39.5 | 66.52x33.24 | 0.52x0.52 | 6H | white | 20PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | KS0108 | |
| 3.2"128X64 monochrome graphic LCD module|with yellow-green backlight|STN(+) | 5.0v | Arduino HTM12864A-01Y-A5P | Graphic LCD Module | 128x64 |
|
113.0x65.0x12.7 | 72.0x39.5 | 66.52x33.24 | 0.52x0.52 | 6H | YG | 20PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | K0108 | |
| 2.5"122X32 Graphic LCD|FSTN+display with Red green blue side backlight |Arduino HTM12232Z-35S-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | R/G/B | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 Graphic LCD | STN positive display with yellow-green side backlight | Arduino HTM12232Z-11Y-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | white | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 Graphic LCD Module | DFSTN-Black Display| 5.0v | Monochrome Display HTM12232Z-11W-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | white | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 monochrome graphic LCD|DFSTN- transflective display| ST7920 controller HTM12232Z-41W-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | white | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 monochrome graphic LCD display | STN (-) display with white side backlight | Arduino HTM12232Z-25W-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | white | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 Monochrome Graphic LCD Module | FSTN+ Transflective Display HTM12232Z-31W-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | white | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 2.5"122X32 Graphics Monochrome LCD Module | STN+ Display with Yellow-Green Side Backlight | Arduino HTM12232Z-01Y-A5P | Graphic LCD Module | 122x32 |
|
84.0x44.0x13.9 | 60.0x18.0 | 48.76x14.36 | 0.41x0.36 | 6H | YG | 24PIN | MCU | Anti-static ESD 8KV | -20~70℃ | 5.0V | ST7920 | |
| 240X120 Graphic COG LCD MODULE FSTN+ Display With White Backlight HTM240120B | COB LCD Module | 240x120 |
|
84.0x50.0x6.6 | 72.0x37.0 | 67.17x33.57 | 0.28x0.28 | 12H | 16pin | MCU | Anti-static ESD 8KV | -20~70℃ | 3.3V | UC1608 |
Search
